PSI Audio AVAA C214 (Active Bass Trap)
2'969.00 CHF par pièce
The PSI Audio AVAA-C214 harnesses innovative AVAA technology, designed to effectively eliminate disruptive bass resonances within the frequency range of 15 Hz to 160 Hz. What sets it apart is its ability to achieve an equivalent absorption area up to 45 times its physical size. Remarkably, this breakthrough is achieved without the need for calibration or tuning.
Beschreibung
Working from 15 Hz to 160 Hz
The AVAA is pressure based absorber.
Whether you have 1 or multiple disturbing room modes, the AVAAC214 will absorb all of these that are present in its location.
AVAA is a revolution
Based on the same absorption principles as the AVAA C20, the AVAA C214 is fully digital and allows control via an app.
No calibration required
Simply place it where your room modes are and it will absorb them. No calibration required.
Optional mounting feet (CHF 190.-)
The mounting feet allow you to easily install an AVAA C214 on a wall, ceiling or simply position it horizontally on the floor.
The assembly remains very compact.
The AVAA is pressure based absorber.
Whether you have 1 or multiple disturbing room modes, the AVAAC214 will absorb all of these that are present in its location.
AVAA is a revolution
Based on the same absorption principles as the AVAA C20, the AVAA C214 is fully digital and allows control via an app.
No calibration required
Simply place it where your room modes are and it will absorb them. No calibration required.
Optional mounting feet (CHF 190.-)
The mounting feet allow you to easily install an AVAA C214 on a wall, ceiling or simply position it horizontally on the floor.
The assembly remains very compact.
Spezifizierungen
High efficiency: As effective as a perfect passive absorber up to 45 x its size.
Digital solution: Ultra low latency processing via 2 independent DSPs.
Works in any type of room: The AVAA C214 can be used anywhere: recording/mixing/mastering studios, OB Vans, hifi listening rooms, machine rooms, etc.
Absorption only: Thanks to our technology, there is no signal emitted, only absorption.
Plug and Play: No calibration required. Simply place it where the room modes are.
Portable: Take it from your recording room to your mixing studio easily.
Dimensions (W×H×D): 21×64×21 cm
Digital solution: Ultra low latency processing via 2 independent DSPs.
Works in any type of room: The AVAA C214 can be used anywhere: recording/mixing/mastering studios, OB Vans, hifi listening rooms, machine rooms, etc.
Absorption only: Thanks to our technology, there is no signal emitted, only absorption.
Plug and Play: No calibration required. Simply place it where the room modes are.
Portable: Take it from your recording room to your mixing studio easily.
Dimensions (W×H×D): 21×64×21 cm
