Pro-Ject RPM 3 Carbon Platine Manuelle avec bras 10
969.00 CHF
La nouvelle platine Pro-Ject RPM3 Carbon utilise des concepts éprouvés sur les autres modèles de la série RPM afin d’améliorer ses performances. C’est une version largement améliorée de la RPM Génie 1.3 avec une cellule Ortofon 2M Silver.
Réserver une ecoute
Réserver une écoute
Je n'ai pas encore de compte
J'ai déjà un compte
Description
Ingenious entry to the world of audiophile luxury.
RPM 3 Carbon uses evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.
A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges. Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!
Specifications:
Precision belt drive using free-standing synchronous motor
Central mass point optimizes vibrancy behaviour
Ultra precision DC-driven AC generator motor power
Inverted platter bearing with ceramic ball
Platter made from MDF using felt mat
10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments
Magnetic antiskating
Counterweight with TPE damping
Available with or without Ortofon 2M Silver cartridge
3 high-gloss colours (black, red, white)
Lid available as an option
RPM 3 Carbon uses evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.
A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges. Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!
Specifications:
Precision belt drive using free-standing synchronous motor
Central mass point optimizes vibrancy behaviour
Ultra precision DC-driven AC generator motor power
Inverted platter bearing with ceramic ball
Platter made from MDF using felt mat
10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments
Magnetic antiskating
Counterweight with TPE damping
Available with or without Ortofon 2M Silver cartridge
3 high-gloss colours (black, red, white)
Lid available as an option
Spécifications
Speed: 33, 45 (manual speed change)
Drive principle: belt drive
Platter: 300mm MDF
Mains bearing: stainless steel axle with ceramic ball
Wow & flutter: 33: +/- 0,14% I 45: +/- 0,11%
Speed drift: 33: +/- 0,19% I 45: +/- 0,08%
Signal to noise: - 71dB
Tonearm: 10” carbon; aluminium and resin
Effective arm length: 254 mm
Effective arm mass: 16 g
Overhang: 16mm
Tracking force: 0 - 25mN
Power supply: 15 volts DC / 800 mA power supply
110/240 Volt - 50 or 60 Hz
Power consumption: 5 watt max / < 0,5 watt standby
Dimensions: 447 x 118 x 373mm (WxHxD)
Weight: 5,5 kg net
Drive principle: belt drive
Platter: 300mm MDF
Mains bearing: stainless steel axle with ceramic ball
Wow & flutter: 33: +/- 0,14% I 45: +/- 0,11%
Speed drift: 33: +/- 0,19% I 45: +/- 0,08%
Signal to noise: - 71dB
Tonearm: 10” carbon; aluminium and resin
Effective arm length: 254 mm
Effective arm mass: 16 g
Overhang: 16mm
Tracking force: 0 - 25mN
Power supply: 15 volts DC / 800 mA power supply
110/240 Volt - 50 or 60 Hz
Power consumption: 5 watt max / < 0,5 watt standby
Dimensions: 447 x 118 x 373mm (WxHxD)
Weight: 5,5 kg net
